Construction: AluminiumFrame sizes: 63 to 180Output: 0.07kW to 22kW
CatalogueSafety LeafletInstallation & Maintenance booklet
The W aluminium range covers products with outputs from as little as 0.07kW to 22kW in frame sizes WU-DA63S to WU-DA180L, in either 2,4,6 or 8 pole speeds.
They are widely used in a diverse range of applications from food and drink to water and sewage. From heating and ventilation to refrigeration.
Some of the benefits of aluminium over cast iron include high resistance to corrosion and atmospheric attack (except chlorine, salt-laden or sulphuric acid) and the fact that aluminium is approximately one third the weight of cast iron.
Construction: Cast IronFrame sizes: 80 to 355Output: 0.75kW to 400kW
The W cast iron motor range covers products with outputs from as little as 0.75kW to 400kW in frame sizes 80 to 355L.They are suitable for use within a diverse range of applications from food and drink to china clay production. From roller table drives to refrigeration.
Many applications often have adverse operating conditions including repeated starting and occasional overloading; the W cast iron range is well suited to these situations.
A virtual go anywhere motor, this cast iron range has a full 3-year guarantee.
Construction: Aluminium or Cast IronFrame sizes: 56 to 450Output: 0.09kW to 900kW
A high quality industrial standard range of electric motors with a Brook Crompton specification suitable for most industrial applications.
The aluminium motors have outputs from 0.09kW to 18.5kW in frame sizes B-DA56 to A-DA160.
The cast iron range of motors have outputs from 0.09kW to 900kW in frame sizes B-DF71M to BU-DF450, in either 2,4,6 or 8 pole speeds.
Construction: Aluminium or Cast IronFrame sizes: 63 to 355Output: 0.07kW to 400kW
Brook Crompton offers the most comprehensive range of brake motors with highly competitive delivery times, due in part to its innovative brake kit concept available on W motors.
Construction: Aluminium
Frame sizes: 71 to 90 (Capacitor Start / Induction Run) 71 to 100L (Capacitor Start / Capacitor Run) 63 to 90L (Permanent Capacitor)
Outputs: 0.12kW to 1.5kW (Capacitor Start / Induction Run) 0.18kW to 3.0kW (Capacitor Start / Capacitor Run) 0.09kW to 2.2kW (Permanent Capacitor)
Single phase motors are used primarily in small workshops and farms with a domestic supply. Some industrial equipment are specifically for use with a single phase electricity supply, such as fans, blowers, centrifugal pumps and high pressure washers.
Dependent on the application we are able to offer different types of single phase motors
Construction: Cast IronFrame sizes: 90 to 315Output: 0.37kW to 315kW
CatalogueSafety LeafletInstallation & Maintenance bookletTechnical Section
The Ex d(e) range of flameproof cast iron motors cover outputs from 0.37kW to 200kW in frame sizes W-EF90 to W-EF315, in 2, 4, 6, & 8 pole speeds. ATEX approved by Baseefa.
The W EEx nA non-sparking range of motors covers products with outputs from 0.18kW to 400kW in cast iron frame sizes W-DF80M to W-DF355L, in either 2,4,6 or 8 pole speeds (also available in aluminum from 71 to 180 frames).
All relevant products fully comply with the requirements of ATEX.
Catalogue - contact salesSafety LeafletInstallation & Maintenance bookletTechnical Section
The dust ignition proof range of W motors covers products with outputs from as 0.18kW to 315kW in cast iron frame sizes W-DF80M to W-DF355L, in either 2,4,6 or 8 pole speeds. All relevant products fully comply with the requirements of ATEX.
The W EEx e increased safety range of motors covers products with outputs from 0.18kW to 315kW in frame sizes W-DF80M to W-DF355L, in either 2,4,6 or 8 pole speeds. ATEX approved by Baseefa.
The W aluminium range covers products with outputs from as little as 0.07kW to 22kW in frame sizes 63 to 180L
The W cast iron motor range covers products with outputs from as little as 0.75kW to 400kW in frame sizes 80 to 355L